Sunday, October 2, 2011

Windows 7 audio : Supported formats vs Default format

Windows 7 and/or some of the audio device drivers have a useful set of settings.
For example, the "Supported formats".
I have my device connected to an old Roland VM-3100Pro mixer which only supports 44.1kHz sampling rate PCM. So, I selected the following :




I thought this was sufficient to get sound working. I was wrong.
Despite my choices, Windows and Realtek had automatically selected the following "Default format" :



Notice that the 48 kHz rate. Never mind that I didn't select that in the "Supported formats". This should not happen. Windows should never pick a format that's been marked as unsupported.

Sunday, September 18, 2011

AMD SB850 SATA controller vs eSATA port multiplier

Last year, I bought three 4-drive eSATA enclosures from SANS. They each come with their own PCI-E eSATA controller card with a Sil3132 Silicon Image controller.

So far, this is the only SATA controller I have ever found that can recognize multiple drives in this enclosure.

The list of the controllers I tested that failed is long :
- Intel ICH9R built-in to my GA-P35-DS3R motherboard
- Promise TX4302
- VIA VT6422 PCI card (technically SATA, not eSATA)
- Gigabyte / J-Micron

And now I can add the AMD SB850 built-in to my GA-890GPA-UD3H motherboard.
What's interesting about this latest controller is that AMD claims port multiplier support with this chip.

And indeed, the BIOS can see multiple drives if I boot with the enclosure connected.
But after the OS boots up (Win7), it only recognizes the first drive in the enclosure.
Very frustrating. I hope someone at AMD is listening. I am using the AMD AHCI compatible driver version 1.2.296 dated 4/15/2011, under Win7 x64.

I tried designating the port as "ESP" in the BIOS, but the only difference that makes is showing the "Eject" icon in Windows. It doesn't help recognize the extra drives in the enclosure.